檢測認證人脈交流通訊錄
JL085A型五位拉動計數器(JL085 5-digit Pulling Counter)
- 用 途:
- 主要應用于高壓開關電器產品,也可以應用于試驗設備,印刷設備等
- 工作原理及簡介: JL085A型五位拉動計數器用于累加記錄機械往復運動的次數,不設回零機構。當記滿99999時再計數就可以從00000開始進行下一循環。計數器的計數輪為內齒傳動。當拉動計數器拐臂時,與拐臂相聯接得推進機構使計數輪進行加法計數。此種計數器主要應用于高壓開關電器產品,也可以應用于試驗設備,印刷設備等。
產品系列及相關技術參數: 型號 JL085A JL085B JL085ZM
顯示數字規格 高×寬 4 mm×2 mm
工作溫度 -10℃~+50℃
最大積算容量 99999
傳動比 1:1
計數速度 ≤300次/分 ≤300次/分 ≤300次/分
拉動角 最大拉動角41o,最小拉動角37o
轉矩 ≤4.18 N·cm
特點 右拉,拐臂逆時針拉動 右拉,拐臂順時針拉動 左拉,拐臂逆時針拉動
重量 約23g
可根據客戶需要設計制作
Introduction: Model JL085 5-digit pulling counter is used to record the accumulative times of the mechanical reciprocating movement. It has no reset design. When the counting times reach to 99999 is completed, re-counting can start form 00000. Its counting wheels are driven by inside pinions. When the arm on the right side of the counter is pulled, the driving mechanism connected to the arm will make the counter carry out counting. It is mainly applied in high-voltage switch, and it can also be applied in testing equipment, printing equipment etc.
Technical Parameters: Display digit size H*W mm 4*2
Max. capacity of accumulative counting 99999
Transmission ratio 1:1
Counting speed < 300 times/minute
Torque ≤4.18 Ncm
Weight 23g
玛纳斯县|
高雄县|
保康县|
棋牌|
磴口县|
抚远县|
连江县|
南涧|
河南省|
蒲城县|
浠水县|
阿拉尔市|
襄樊市|
罗甸县|
安平县|
衡阳市|
元朗区|
桐城市|
金沙县|
龙井市|
天柱县|
霍林郭勒市|
旬邑县|
永吉县|
龙海市|
武胜县|
曲麻莱县|
东海县|
汝南县|
台江县|
开江县|
渝北区|
广河县|
山东|
冕宁县|
宜黄县|
方城县|
普格县|
广宁县|
晴隆县|
郴州市|