輸入: Thermocouple: K, J, R, S, E, T, N, PL-II, C (W/Re5-26) External resistance: 100Ω or less. B Thermocouple: External resistance: 40Ω or less. RTD: Pt100, JPt100 3-wire system, allowable input wire resistance (10Ω or less per wire). DC Current: 0 to 20 mA DC, 4 to 20 mA input impedance 50Ω (50Ω shunt resistor sold separately). DC Voltage: 0 to 1 VDC. Input Impedance: 1MΩ or greater.
輸出類(lèi)型: Relay Contact: 3A @ 250 VAC, Resistive: 1A @ 250 VAC inductive (CØS=0.4), Electric life 100,000 cycles. Switched Voltage (for SSR drive): 12 VDC @ 40 mA max. (short-circuit protected). DC Current: 4 to 20 mA DC, load resistance: max. 550Ω output accuracy: ±0.3% of output span. Resolution: 12,000 counts.
控制類(lèi)型 P, PI, PD, PID, Self Tune, On-Off, Process Retransmission.
Proportional Band: 0.0 to 110.0% (ON/OFF when set to 0.0).
Integral Time: 0 to 1000 seconds (off when set to 0).
Derivative Time: 0 to 300 seconds (off when set to 0).
Proportional Cycle: 1 to 120 seconds.
Manual Reset: Proportional band converted value.
輸出范圍: 0 to 100% (DC current output type: -5 to 105%).
Hysteresis: Thermocouple and RTD Input: 0.1 to 100.0 degrees; DC Voltage and Current Input: 1 to 1000 (decimal point place follows the selection).
電源: 120-240 VAC, 50-60 Hz, 24 VAC 50-60 Hz optional.
Power Consumption: Approximately 6VA.
精度: Thermocouple Input: ±0.2% of input span, ±1 digit or 4°