(1)腳手架測試標準:EN 1004:2004,EN 74-1:2005,AS/NZS
1576.2:2009,GB 15831-2006,ANSI/SSFI SC100-5/05,
CAN/CSA-S269.2-M87:2003
(2)腳手架CE測試認證項目:
Wind resistance (風載)
Resistance to snow load?。ㄑ┹d)
Operating effort?。ú僮髁Γ?
歐洲標準:EN 1004:2004
Mobile access and working towers made of prefabricated elements — Materials, dimensions, design loads, safety and performance requirements
預制組件制的移動通道和工作塔.材料、尺寸、設計載荷、安全和性能要求
測試項目:
鍍鋅層厚度 The thickness of zinc coated (測試方法: EN 12811-2)
整體結構尺寸(包括平臺板尺寸、凈高、護欄尺寸、梯段尺寸等等) Dimension of the structure
腳輪測試 Castor wheels test
整體結構最不利荷載組合測試(樣品總體高度需不超過3m) Tower structure load test in worst combinations(Sample height within 3m)
平臺均布載荷(等級2或等級3)Uniformly distributed on the whole area(Class 2 or Class 3)
平臺組件受力撓度 Elastic deflection of platform components
護欄受力撓度 Elastic deflection of side protection
垂直組件組合傾斜角度 Inclinations between vertical components
整體結構剛度測試 Stiffness test
歐洲標準:EN 74-1:2005
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
腳手架和支承架用扣件、中心螺栓和底座.第1部分:管用扣件.要求和試驗規程
測試項目:
直角扣件(需要指定等級Class A /Class B)
抗滑Slipping force
抗破壞Failure force
抗拉分Pull apart force
壓痕測試indentation
十字抗彎剛度及極限彎矩(僅適用B級) Cruciform bending stiffness and Cruciform bending ultimate moment(Class B only)
扭轉剛度及轉矩(僅適用B級) Rotational stiffness and moment(ClassB only)
旋轉扣件(需要指定等級Class A/Class B)
抗滑Slipping force
抗破壞failure force
壓痕測試 indentation