檢測認證人脈交流通訊錄
- T8041 CO2 Duct Probe Sensor Datasheet 風道型二氧化碳變送器 Telaire Ventostat T8041 CO2 Duct Probe Transmitter – Simple Installation!! The T8041 is a CO2 transmitter designed to be installed in HVAC return air ducts. This product offers simplicity in design and installation. Available with analog 0-10V output only. Includes mounting hardware and installation instructions. Specification Measurement Range: 0-2000 PPM factory calibrated Duct Air Velocity: 0 to 1500 ft/min Temp Dependence: 0.2% of full scale per ºC Stability: <2% of full scale over the life of the sensor (15 years typical) Accuracy: ±40 PPM+3% of reading @22ºC (72ºF) when compared with a factory certified reference. Non-linearity: <1% of full scale @22ºC (72ºF) Pressure Dependence: 0.13% of reading per mm of mercury Calibration: Sensors will be calibrated at zero and span at the factory. Calibration in the field will not be required. Sensors will be shipped with ABC Logic™ turned on.* Response Time: 3 minutes typical for a 90% step change at low duct speeds. Sampling Rate: Every 2 seconds, 25% duty cycle Warm up time: < 2minutes (Operational) 10 minutes to achieve maximum accuracy. Operating Conditions: Temperature: 0ºC to 50ºC (32ºF to 122ºF) Humidity: 0 to 95% Relative Humidity, non-condensing Storage Conditions: -20ºC to 70ºC (-40ºF to 158ºF) Output: Analog 0 to 10 VDC (100 ohm output impedance) Power Sup Reqmts: 18 to 30 VAC RMS, 50/60 Hz or 18 to 42 VDC, polarity protected. Power Consumption: Typical values (1.65 Watts Peak, 0.65 Watts Avg. @ 42 VDC) *Note: Automatic Background Calibration or ABC Logic™ is a patented self- calibration technique utilized in applications where concentrations will drop to outside ambient conditions (Approximately 400 PPM) at least 3 times in a 14-day period, typically during unoccupied periods. Full accuracy is achieved after two weeks of operation. Physical Requirements Size: Dimensions: Probe Length: 4.12” Probe Diam: 1.24” . Junction Box Depth: 1.6” Height: 3” square approximately Color: 701 Black Flammability Classification: UL 94V-5
關于檢測通 | 服務項目 | 合作中心 | 資訊投稿 | 媒體聚焦 | 聯系我們 | 客服中心 | 網站地圖 | 友情鏈接
Copyright ? 2010-2016 生意寶檢測通 版權所有.浙ICP備14007955號
浙公網安備 33010602010408號
地址：浙江省杭州市莫干山路187號易盛大廈12F 郵政編碼：310012
客服QQ:2804879579 檢測通QQ群:檢測資源-詢盤、人脈 319379593
-
檢測通手機版 
檢測通官方微信
檢測通QQ群